19th YEAR IN THE INDUSTRY
Choice of Quality ATS TRAFO
We have been ensuring the satisfaction of our users since 2003 with our equipment aiming at high efficiency and our technology that is always renewed and developed.
About Us
19th YEAR IN THE INDUSTRY
Choice of Quality ATS TRAFO
We have been ensuring the satisfaction of our users since 2003 with our equipment aiming at high efficiency and our technology that is always renewed and developed.
ABOUT US
ATS TRAFO FOR THE BEST
In 2003, Adiyaman founded in Organized Industrial Zone ATS transformer, three-phase and tekfazl, in connection with the production of oil Distribution and Power Transformers, 15.000 m2 open and 10.000 m2 closed total area 25.000 m2 , in accordance with the specified cooling system to the standard 36 kV high voltage and 25-5000 until kV power distribution and power up to 50 mVA in the production of power transformers and experienced staff offers customers with quality equipment.
19 YEARS OF EXPERIENCE
Advanced Infrastructure & Strong Production
WINDINGS
In distribution and power transformers, windings are designed so as to provide maximum strength to axial and radial forces occurring during a short circuit. LV (low voltage) windings are generally from a foil or paper insulated flat conductor.
CORE
In transformers, the core consisting the magnetic circuit is made up from cold-rolled, grains-oriented (CRGO) and low-loss electrical silican steel.
ACTIVE PART
The active part of a transformer consists of the core, coils, upper cover, tap changer, bushings, and protection and connection members on the upper cover.
TANK
In tank manufacturing, the tank lower pan, side walls and the upper cover are made by using black sheet metal to quality St 37. Side surfaces that carry out the cooling function in transformers are made up from cooling members manufactured of 1, 2 mm or 1, 5 mm thick sheet metal, depending on the transformer’s power, called corrugated wall panels.
DRYING AND OIL FILLING
The active part through with the assembly operation is dried in a special high-vacuum drying furnace for a period of time set forth within a predetermined program depending on pow-er and voltage values, and placed in the tank.
PAINTING
Tanks complete with manufacturing are prepared by sanding and chemical cleaning methods prior to painting to ensure a longer lifetime for the applied primer and two final coats of paint.
References
